Nanlux Evoke 2400B Spot Light with 45° Reflector

Nanlux Evoke 2400B Spot Light – 41,910 lux at 3m with 45° reflector

The Nanlux Evoke 2400B combines high output and flexible controls in a weather-resistant LED fixture. It delivers powerful illumination while offering color tuning, multiple control options, and an intelligent cooling system. The Evoke 2400B ships with a 45° reflector and accessories for immediate use on set.

High output and LED efficiency

The Evoke 2400B produces an intense output of 41,910 lux at 3 meters when used with the included 45° reflector at 5600K. Despite a rated power draw of 2400W, the unit is designed to match or exceed the practical output of much larger traditional sources. As an LED fixture, it eliminates the need for lamp preheating or cool-down, operates flicker-free, and supports smooth dimming from 0.0% to 100.0%.

• Output: 41,910 lux @ 3m (with a 45° reflector / 5600K)
• Rated Power: 2400W
• CCT Range: 2700K–6500K

Advanced green–magenta control across the CCT range

The Evoke 2400B includes a dedicated green/magenta adjustment to maintain consistent color along the Planck curve. Traditional bi-color LEDs sometimes show magenta in the mid-range or green at the extremes. Nanlux addresses this with both auto-calibration and an expanded G/M adjustment range, enabling up to G/M ±80 △uv across the full CCT span.

This adjustment helps match other fixtures or on-set light sources, simplifies post-production color matching, and allows creative fine-tuning of skin tones or atmosphere by adding subtle magenta or green shifts when desired.

True-to-life color rendition

Nanlux tuned the Evoke 2400B for accurate color reproduction, balancing fidelity and saturation for demanding productions. Below are the measured metrics provided for color quality.

• CRI Average: 96
• TLCI Average: 97
• TM-30 Rf Average: 95
• TM-30 Rg Average: 100
• SSI (3200K): 84
• SSI (5600K): 74

Lightweight, rugged construction with IP55 protection

The Evoke 2400B uses magnesium alloy in its construction to optimize strength-to-weight. Nanlux supplies both the lamp head and power supply with an IP55 weather-resistant rating, allowing the fixture to perform in varied environments while remaining robust. The lamp head weight is specified as 15 kg (33 lbs), which the manufacturer notes is approximately 25% lighter than a comparable traditional HMI with the same brightness. The power supply weight increases only 1 kg (2.2 lbs) compared to the smaller Evoke 1200B's supply.

Intuitive controls and precise dimming

The fixture provides a simple, physical interface with four buttons, three knobs, and a 3.5-inch LCD screen for direct control. Users can toggle brightness to the currently set dimming position with a short press of the knob. Dimming resolution is fine-grained, adjustable in 0.1% increments across the full 0.0%–100.0% range, which supports precise exposure adjustments on set.

Comprehensive wired and wireless connectivity

The Evoke 2400B supports multiple control protocols to suit studio and location workflows. It includes both wired and wireless options to integrate into complex lighting systems or fast, mobile setups.

• Wire controller: Lamp head includes a wired controller port for a dedicated wired remote (controller under development).
• DMX/RDM: A 5-pin XLR DMX In/Out port supports DMX and RDM for wired console control and reliable group control in multi-fixture setups.
• Art-Net/sACN: Two LAN ports provide Ethernet control via Art-Net and sACN protocols for longer-distance transmission and multi-universe setups.
• NANLINK App: Built-in 2.4 GHz and Bluetooth modules enable wireless control through the NANLINK system using personal devices.
• LumenRadio: The included LumenRadio TimoTwo module supports CRMX transmit/receive for wireless integration with other CRMX-capable fixtures.

Intelligent, quiet heat dissipation

The Evoke 2400B uses a multi-mode cooling system designed to balance thermal performance and acoustic requirements. Users can choose from four fan modes to match shooting conditions, especially when sound recording or minimal noise is critical.

• SMART mode: Fan speed automatically adjusts to ambient temperature; noise measured at 29 dBA in SMART mode.
• FULL SPEED mode: Allows full power output with maximum cooling.
• LOW SPEED mode: Limits output to 50% to reduce fan noise and heat.
• OFF mode: Limits output to 15% and turns fans off for the quietest operation.

Pack contents

The Evoke 2400B ships with the main components and accessories needed to deploy the fixture on set.

• Evoke 2400B ×1
• Yoke ×1
• Power Supply ×1
• RF-NLM-45-EV2400 Reflector 45° ×1
• USB Drive ×1
• AS-CP-QR-EV Quick Release Clamp ×1
• WS-RC-C2 Remote Controller ×1
• DC Connection Cable 7.5m ×1
• AC Power Cable 3m ×1
• User Manual ×1

Specifications

FAQ

Question: What control options are available for the Evoke 2400B?
Answer: The Evoke 2400B offers multiple control methods. You can use the onboard interface (4 buttons, 3 knobs, 3.5" LCD), wired DMX/RDM via a 5‑pin XLR, Ethernet control over Art‑Net or sACN through two LAN ports, NANLINK wireless control over built‑in 2.4 GHz and Bluetooth, or wireless CRMX via the integrated LumenRadio TimoTwo module. A wired remote port on the lamp head supports a dedicated wire controller when available.

Question: How does the G/M adjustment help on set?
Answer: The G/M ±80 adjustment helps maintain consistent color along the Planck curve and corrects green or magenta casts that can occur with bi‑color mixing. You can match other fixtures or subtly alter tones—such as adding magenta for skin warmth or green for creative atmosphere—without changing CCT settings.

Question: Is the Evoke 2400B suitable for outdoor use and is it heavy to move?
Answer: The lamp head and power supply are rated IP55 for weather resistance, which supports use in a range of on‑location conditions. The lamp head uses magnesium alloy to reduce weight; it is specified at 15 kg (33 lbs), described as roughly 25% lighter than a comparable traditional HMI of similar brightness.

Question: How does the cooling system affect performance and noise?
Answer: The adjustable cooling system offers SMART, FULL SPEED, LOW SPEED, and OFF modes to balance cooling needs with acoustic requirements. SMART mode auto‑adjusts fan speed to ambient temperature and records a noise level of 29 dBA. FULL SPEED enables full output, LOW SPEED limits output to 50%, and OFF limits output to 15% for the quietest operation during sound‑sensitive shoots.