Nanlux Evoke 900C Spot Light with Flight Case

NANLUX Evoke 900C Spot Light – Compact LED with RGBLAC Six-Color Mixing and 12940 lux Output

The NANLUX Evoke 900C is a compact spot light designed for filmmakers who need a wide color spectrum and high output in a portable package. It combines a six-color RGBLAC mixing system with a strong measured output of 12940 lux at 3 m (with a 45° reflector at 5600K). The fixture ships with a flight case for safe transport and storage.

Key features at a glance

• High measured output — 12940 lux at 3 m using the included 45° reflector at 5600K, giving strong directional light for location or studio use.
• RGBLAC six-color mixing — adds Lime, Amber and Cyan to primary RGB for wider color options and improved accuracy across the spectrum.
• Ultra-wide CCT range — adjustable from 1800K to 20000K, plus G/M ±200 adjustment for fine green-magenta balancing.
• Strong color rendering — average CRI/TLCI of 96/96 with TM-30 Rg average of 94 and TM-30 Rf average of 100.
• Robust mounting — NL mount for optics and modifiers.
• Weather resistance — IP55 rating for both the fixture and the power supply, suitable for demanding outdoor use.
• Flexible control options — onboard control, remote controller, Nanlink app, DMX/RDM, LumenRadio CRMX, Art-Net/sACN and wire control.
• Precise dimming — 0–100% in 0.1% increments with five DMX dimming curves: linear, exponent, logarithm, S-curve, and gamma 2.2.
• Advanced color modes — includes Advanced HSI, RGBW, XY and GEL modes with a Gel Mode library of 151 LEE gels.
• Built-in effects — 15 pre-programmed effects to simulate common lighting scenarios.
• Cooling options — adjustable fan with four modes (Smart, Full Speed, Low Speed, Off); in 100% Smart mode the noise level is 25 dBA.
• Physical details — lightweight fixture body (7.7 kg for the light head only) and a yoke with 15° tilt adjustment for easier positioning when modifiers are attached.
• Power supply convenience — the power supply comes with a quick-release for rapid setup and teardown.

Operation and control

The Evoke 900C places controls where technicians expect them. An upgraded 3.5-inch full-color display, four buttons and three knobs provide a clear, tactile interface so you can view and adjust parameters quickly. For remote or networked setups, the unit supports a wide range of wired and wireless control methods, letting you choose the most suitable option for your lighting scenario.

Color performance and modes

Nanlux's RGBLAC system broadens the color palette by adding lime, amber and cyan to standard RGB. This extends the fixture's usable range and helps achieve precise color matches. The Evoke 900C offers conventional CCT control and advanced modes such as HSI, RGBW, XY and Gel. Its Gel Mode includes a library of 151 LEE gels to simplify matching practicals and fixtures on set.

Durability, cooling and mounting

The fixture and power supply carry an IP55 rating, providing resistance to dust and water spray for outdoor shoots. You can select from four fan modes depending on noise and cooling needs. In 100% Smart mode the fan operates at 25 dBA, offering a balance between thermal management and low noise. The yoke provides a 15° tilt adjustment to help when using large modifiers or tight rigging positions.

What’s in the box

• Evoke 900C ×1
• Yoke ×1
• Power Supply ×1
• RF-NLM-45 Reflector ×1
• DC Connection Cable 7.5 m ×1
• AC Power Cable 6 m ×1
• AS-CP-QR-EV Quick Release Clamp ×1
• USB Flash Drive ×1
• WS-RC-C2 Remote Controller ×1
• User Manual ×1
• CC-EV1200-FT Flight Case ×1

FAQ

Question: Is the Evoke 900C suitable for outdoor shoots?
Answer: Yes. Both the fixture and its power supply are IP55 rated, giving resistance to dust and water spray and making the light suitable for outdoor or wet-weather shooting.

Question: How can I control the light remotely?
Answer: You can control the Evoke 900C via multiple methods: onboard controls, the included remote controller, the Nanlink app, DMX/RDM, LumenRadio CRMX, Art-Net/sACN and wired control, offering flexibility for different production setups.

Question: How precise is the dimming and what dimming curves are available?
Answer: Dimming is adjustable from 0–100% in 0.1% increments for fine control. Five dimming curves are available via DMX—linear, exponent, logarithm, S-curve and gamma 2.2—to match industry-standard control needs.

Question: What color modes and color accuracy does the fixture offer?
Answer: The light uses RGBLAC six-color mixing and supports Advanced HSI, RGBW, XY and Gel modes. It offers excellent color rendering, with average CRI/TLCI at 96/96 and TM-30 averages of Rg 94 and Rf 100.

Question: What noise level can I expect on set?
Answer: The Evoke 900C has an adjustable fan system with four modes. In 100% Smart mode the measured noise level is 25 dBA, which balances cooling and quiet operation for many shooting situations.