Nanlux WC-LM6P-C1 Controller Dyno & Evoke

Nanlux WC-LM6P-C1 Controller Dyno & Evoke – 6-Pin Wired Remote with 3.2-inch Display and 8m Cable

What the WC-LM6P-C1 is

The Nanlux WC-LM6P-C1 is a 6-pin wired controller designed for the Evoke and Dyno series. It provides an alternative cabled control solution that complements the fixtures’ existing physical, wired, and wireless controls. Use it when wireless communication is impractical or when production constraints mean you cannot run a dedicated wired line between a light and a control board or operator.

Key features

• Remote operation: Replicates the fixtures’ physical controls to allow remote operation up to 8 m from the lamp head.
• Clear display: A 3.2-inch screen presents an intuitive control interface similar to the on-board controls of the fixtures.
• Physical controls: The controller is equipped with three strategically placed knobs and three buttons to provide a broad range of adjustment options.
• Robust connectivity: Includes an 8 m connection cable with 6-pin self-latching aviation connectors on both ends, plus an additional USB connector for power where required.
• Reliable transmission and power: The connection design supports high-quality information transmission and a stable power supply to help when fixtures are rigged at height or in challenging set conditions.

When to use this controller

Choose the WC-LM6P-C1 when wireless links are unreliable due to environmental factors, or when your budget, schedule, or crew size prevents running a full wired system from each light back to a central board or operator. It offers a straightforward way to control Nanlux high-output fixtures from a distance while keeping control layout and feedback consistent with on-board operation.

Compatibility and power notes

The controller is intended for use with Evoke and Dyno series fixtures. Note that the Evoke 2400B supports both information transmission and power supply through the self-latching aviation connector alone. Other lighting fixtures in the series require both the self-latching aviation connector and the USB connector to provide power.

Kit contents

• 6 Pin Wired Controller × 1
• Connection Cable 8M × 1
• User Manual × 1
• Carrying Bag × 1

Specifications

FAQ

Question: Is this controller compatible with all Evoke and Dyno fixtures?
Answer: The controller is designed for the Evoke and Dyno series. Compatibility with specific models is supported, but note the Evoke 2400B can receive both data and power through the aviation connector alone while other fixtures may require the additional USB connector for power.

Question: How far can I place the controller from the lamp head?
Answer: The controller allows remote operation up to 8 m from the lamp head using the supplied 8 m connection cable.

Question: Can the controller replace wireless control entirely?
Answer: It serves as an alternative or complement to wireless and on-board controls. Use it where wireless performance is affected by environment or when running separate wired control to an operator is not practical.

Question: What is included in the kit and what should I check before use?
Answer: The kit includes the 6 Pin Wired Controller, an 8 m connection cable, a user manual, and a carrying bag. Before use, confirm whether your fixture requires both the aviation connector and USB connector for power or whether the aviation connector alone (as with the Evoke 2400B) is sufficient.

Question: Will the controller feel similar to the fixture’s on-board controls?
Answer: Yes—the 3.2-inch display and control layout replicate the on-board interface to provide a familiar and straightforward operation for both new and experienced users.