NiSi Filter 112mm for Nikon Z14-24mm/2.8S ND1000 (10Stop)

NiSi 112mm ND1000 (10 Stop) for Nikon Z 14-24mm f/2.8S – Screw-in fit for HB-97 hood and 10-stop light reduction

This NiSi 112mm Circular ND1000 (10 Stop) filter fits the Nikon Z 14-24mm f/2.8S and is designed to work with the screw-in design of the HB-97 lens hood that comes standard with that lens. It reduces incoming light by 10 stops, enabling longer exposures or wider apertures in bright conditions.

Compatibility and physical fit

The filter is specifically made for the Nikon Z 14-24mm f/2.8S and its HB-97 screw-in hood. As a circular screw-in filter with a 112mm diameter, it installs directly into that hood design. This ensures a secure, aligned fit when you attach the filter to the lens assembly that uses the HB-97.

What the ND1000 does and when to use it

The NiSi ND1000 lowers the amount of light entering the camera by 10 stops (3.0 density). As a neutral density filter, it darkens the entire image without affecting color balance, allowing you to:

• Use a wider aperture in bright light to control depth of field.
• Use a slower shutter speed to convey motion, such as smoothing water or showing movement.

Use the 10-stop ND outdoors during bright daylight when ambient light is strong. With appropriate camera settings, you can extend exposures for up to 5 minutes during golden hour, depending on light conditions and subject.

Optical quality and coatings

NiSi manufactures this filter from high-quality optical glass and applies a double-sided, multi-coating lens technology to preserve image detail. The filter includes a nano coating to prevent loss of fine detail, and it maintains true-to-life color reproduction by design.

Additionally, the filter has an infrared protection coating layer. This reduces the risk of unwanted red color casts that can appear from infrared light when shooting at small apertures, helping to restore natural color in those situations.

Frame and construction

The filter frame uses an ultra-slim brass knurling design and is produced with highly accurate brass milling. This construction supports a thin profile while maintaining a solid mechanical fit and reliable threading when screwing into the HB-97 hood.

Protective and anti-reflective finishes

NiSi fits this ND1000 filter with an exclusive “U” type anti-reflective Nano coating and a hardened waterproof coating. The enhanced waterproof coating is applied on both sides of the glass to help keep the surfaces clean and to resist moisture and fingerprints during outdoor shooting.

Key features

• Ultra Slim Brass Knurling Frame
• Optical Glass H-K9L
• High Definition
• True to life color
• Nano Coating
• Enhanced waterproof coating on both sides

Specifications

How this filter helps your photography

By using the NiSi 112mm ND1000, you gain control over exposure in bright conditions. For landscape and long-exposure photography, the filter lets you create motion blur effects and maintain a wide aperture for subject isolation. The infrared protection and multi-coatings also help preserve accurate color and fine detail when you push exposure times or stop down the lens.

FAQ

question: Will this filter physically fit my Nikon Z 14-24mm f/2.8S?

Answer: Yes. The filter is designed for the Nikon Z 14-24mm f/2.8S and matches the screw-in design of the HB-97 lens hood that comes with that lens, providing a secure installation.

question: How much light does this ND filter block, and does it change color?

Answer: The ND1000 provides a 10-stop (3.0 density) reduction in light. It is a neutral density filter, so it is designed not to affect the coloration of your image. The added infrared protection helps prevent red color casts caused by infrared light at small apertures.

question: When should I use this 10-stop ND filter?

Answer: Use it in bright daylight when you need significant light reduction to use slower shutter speeds or wider apertures. It is especially useful for long exposures outdoors; with appropriate settings you can extend exposures for up to 5 minutes during golden hour, depending on the available light.

question: What materials and coatings protect the filter and image quality?

Answer: The filter uses high-quality Optical Glass H-K9L with double-sided multi-coatings and a Nano coating to preserve detail. It adds a U type anti-reflective Nano coating and an infrared protection coating to maintain true-to-life color, and a hardened, enhanced waterproof coating on both sides to resist moisture and smudges.