NiSi Filter Holder 100mm For Sony 14mm F1.8

NiSi Filter Holder 100mm For Sony 14mm F1.8 – Mounts on Lens Hood and Holds Up to Two 100mm Square Filters

This NiSi filter holder is custom designed for the Sony 14mm F1.8 lens and its lens-hood mount. It accepts 100mm wide square filters that are up to 2mm thick. The holder gives you a secure, lens-specific mounting solution for square filters on this particular ultra-wide lens.

Designed for the Sony 14mm F1.8

The holder mounts directly to the lenshood-mount on the Sony 14mm F1.8 lens. Because it is made specifically for this lens, it aligns with the hood mount for a proper fit and stable attachment.

Filter capacity and format

• Accepts 100mm wide square filters.
• Supports filter thickness up to 2mm.
• Holds up to two square filters at the same time, allowing layered filter combinations.

Rotation and handling

The holder allows 360 degrees rotation. This full rotation gives you freedom to position and orient the filters as needed.

Secure locking and construction

• Features a redesigned locking wheel for reliable security.
• The locking wheel also makes it easier to add and remove the filter holder quickly and securely.
• Built from aluminium alloy for a sturdy yet lightweight construction.

Optical note

When you use the holder with filters rotated to 45 degrees, it can provide slight vignetting in the corners. Be aware of this behavior when composing at extreme angles.

FAQ

question: Which lens does this filter holder fit?
Answer: It is custom designed to mount on the lenshood-mount of the Sony 14mm F1.8 lens.

question: What filter size and thickness does the holder accept?
Answer: The holder accepts 100mm wide square filters with a maximum thickness of 2mm.

question: How many filters can I use at once?
Answer: You can use up to two square filters simultaneously in the holder.

question: Will the holder affect the image corners?
Answer: It can produce slight vignetting in the corners when filters are used at a 45 degree orientation, so plan composition accordingly.

question: How is the holder secured to the lens and how easy is it to remove?
Answer: The holder uses a redesigned locking wheel that provides secure attachment and makes it easier to add or remove the filter holder as needed.

question: What is the holder made from?
Answer: The holder is constructed from aluminium alloy for durability and stability.