Description
Article no.: 28682
The NiSi ND-Vario 1-5 Stops True Color 62mm is a variable neutral density filter that gives you precise exposure control across a 1 to 5 EV range. It maintains true colors to avoid the color shift commonly seen in other variable ND filters. You can adjust the density steplessly by rotating the front ring, and built-in end stops help you know the filter position during active shooting.
Use this filter to reduce light entering the lens so you can shoot with wider apertures or longer shutter speeds under bright conditions. It works well for both photography and video: photographers gain creative control over depth of field, and videographers can keep their designated frame rate while fine-tuning exposure and depth of field.
You control the ND factor by turning the filter’s front ring. The ring is visually marked with numbers that represent different stop values, which makes repeatable adjustments faster and more reliable.
Additionally, the ring includes silver side knurlings for a secure grip, and an optional silver rotating lever that can be attached or removed for easier operation when needed. The filter also has hard stops at each end of the rotation so you can quickly find the minimum and maximum density positions during action use.
The filter uses high-definition optical glass to preserve image resolution and overall quality. An advanced nano coating repels water, grease, and dirt, which makes the filter easier to clean and helps maintain optical clarity. The coating is also anti-reflective.
The filter ring is thin to reduce the risk of vignetting on wide-angle lenses, and the front thread is larger to help avoid vignetting on wider optics. The filter frame is made from high-quality aluminum, making it light yet strong for everyday use.
For best results, NiSi recommends using a variable ND filter on lenses with a focal length of 35 mm or more (full frame). However, the thin filter ring and larger front thread are designed to reduce vignetting when you do use wider-angle lenses.
| Specification | Value |
|---|---|
| Filter type | Variable Neutral Density |
| ND range (factor) | 0.3 to 1.5 |
| Exposure reduction | 1 to 5 stops |
| Thread size | 62 mm |
| Glass | High-definition optical glass |
| Coating | Nano coating — waterproof and anti-reflective |
| Included accessories | Front protection cap, small storage bag, optional rotating lever |
| Special features | Marked stop values on front ring, silver side knurlings, hard end stops, thin filter ring to reduce vignetting |
| Recommended focal length (full frame) | 35 mm or more |
Question: Will this filter cause color shift in my images?
Answer: The NiSi ND-Vario is designed with True Color to avoid the color shift often seen in other variable filters, so you should retain accurate color reproduction.
Question: How do I control the density precisely during shooting?
Answer: Rotate the front ring, which is visually marked with numbers representing stop values. You can use the optional removable lever for faster adjustments, and the built-in hard stops indicate the end positions so you always know the filter’s setting.
Question: Is this filter suitable for video and cinema use?
Answer: Yes. For video, you can combine aperture adjustments with the variable ND to fine-tune depth of field while keeping your designated frame rate. The hard stops and marked values help make repeatable settings easier during filming.
Question: Will I get vignetting on wide-angle lenses?
Answer: The filter uses a thin ring and a larger front thread to minimize vignetting on wider lenses. For best results, NiSi recommends using variable ND filters on lenses of 35 mm focal length or more (full frame).