NiSi Filter S5 Circular ND1000 (for S5 Holder)

NiSi Filter S5 Circular ND1000 (for S5 Holder) – 10-stop Neutral Density for long daytime exposures

This NiSi Circular ND1000 is designed specifically for use with the NiSi S5 150mm filter holder system. It screws into a NiSi S5 150mm filter holder adapter ring after the kit’s included Pro Screw-In Circular Polarizer Filter has been removed. When mounted, the filter reduces exposure by 10 stops to enable significantly longer shutter speeds or wider apertures in bright light.

What this filter does

• 10-stop exposure reduction: The ND1000 provides a 10-stop reduction in light, allowing you to slow exposure times or open the aperture beyond what ambient light normally permits.
• 3.0 density: Its 3.0 density darkens the entire image so you can control motion blur and depth of field more effectively.
• Control depth of field and motion: By slowing shutter speeds or increasing aperture, you can create motion effects or achieve shallower depth of field even in bright conditions.
• Better handling of high contrast: ND filters help when highlights and shadows have too large a contrast range to yield a single quality exposure.

Typical use cases

Use the ND1000 during bright daylight, especially outside of golden hour, when ambient light is strong and much more light blocking is needed. During golden hour and with appropriate camera settings, this filter can prolong exposures for up to five minutes to create dramatic long-exposure effects.

Optical quality and coatings

• High-quality optical glass: The filter is made from optical glass rather than resin to preserve image detail.
• Nano coating: A nano coating helps prevent loss of fine detail and reduces unwanted reflections.
• Infrared protection: The filter includes an infrared protection coating layer to limit infrared light reaching the sensor, preventing unwanted red color casts when shooting at small apertures.
• NiSi Pro Nano Coating: This proprietary coating reduces reflections and provides a waterproof, scratch-resistant surface that makes cleaning fingerprints, dust, and water stains easier.

Installation notes and compatibility

Install the ND1000 by screwing it into the NiSi S5 150mm filter holder adapter ring. First remove the kit’s included Pro Screw-In Circular Polarizer Filter; the ND1000 is intended to replace the screw-in polarizer in that adapter. Important: this filter cannot be used in the NiSi S6 filter holder.

Care and handling

Because the filter features NiSi’s nano and Pro Nano coatings, it resists water and scratches and is easier to clean than untreated glass. Still, handle with care to avoid scratches and keep the surface free from dust and fingerprints for best image quality.

FAQ

Question: Will this filter change the colors in my photos?
Answer: No. NiSi ND filters are designed not to affect image coloration and aim to deliver true-to-life color while reducing light by 10 stops.

Question: Can I use this filter with the NiSi S6 filter holder?
Answer: No. This ND1000 is designed for the NiSi S5 150mm system and cannot be used in the NiSi S6 filter holder.

Question: How do I install the ND1000 in my S5 system?
Answer: Remove the kit’s included Pro Screw-In Circular Polarizer Filter from the S5 adapter ring, then screw the ND1000 into the adapter ring in its place.

Question: How long can I prolong exposures with this filter?
Answer: In bright daylight the filter provides a 10-stop reduction. During golden hour, with appropriate camera settings, it can prolong exposures for up to five minutes to achieve long-exposure effects.

Question: How does the filter handle infrared light and reflections?
Answer: The filter includes an infrared protection coating to reduce unwanted infrared color casts, and the NiSi Pro Nano Coating helps reduce reflections while offering waterproof and scratch-resistant benefits for easier cleaning.