Description
Article no.: 29365
Panasonic DMW-XLR1 GH5 – 2-Channel XLR Microphone Adapter Powered from Camera Hot Shoe
The Panasonic DMW-XLR1 lets you record high-quality stereo or surround sound directly to your camera. It supports synchronized recordings and high-resolution audio up to 96kHz/24bit. You can mount it on the camera’s hot shoe and draw power from the camera battery for a compact, camera-mounted audio solution.
Key features and controls
The adapter combines a professional microphone mixer and XLR interface in a user-friendly design. It uses analog switches and rotary controls so you can quickly set levels and modes while shooting. In addition to clear physical controls, the unit offers protective elements to keep connectors and adjustment panels safe during transport and use.
- Connects and is powered via the camera's accessory shoe/flash shoe.
- Two XLR inputs for connection of microphones, allowing one or two microphones to be used.
- Selectable Line level, microphone level and phantom power mode (+48V) for compatibility with various microphone types.
- Optional high-pass filter with cut-off frequencies at 16 Hz or 160 Hz to reduce low-frequency noise when needed.
- Gain settings available at -20, 0, +20.
- Choose manual level setting or ALC (automatic level control) depending on shooting requirements.
- Cable clamp keeps the wiring organized and secured to the unit.
- Extra accessory shoe available on top for mounting additional accessories.
- Adjustment panel is protected by a transparent cover to prevent accidental changes while still allowing visibility.
- Sturdy protective covers for the XLR inputs to protect connectors when not in use.
Typical use cases
Use the DMW-XLR1 for professional video production where clean, synchronized audio is essential. It suits interviews, run-and-gun shoots, and any situation that benefits from camera-mounted XLR inputs and high-resolution recording. You can rely on phantom power for condenser microphones or switch to line/mic levels for other sources.
Compatibility
The adapter is compatible with multiple Panasonic camera models. Attach it to the camera hot shoe and use the camera’s battery to power the unit.
- S5M2
- S5M2x
- G9M2
- GH6
- GH5
- S1
- S1R
- SH1
Technical specifications
| Specification | Details |
|---|---|
| Inputs | Two XLR inputs (2-channel) |
| Power | Powered via camera accessory shoe / flash shoe |
| Phantom power | +48V |
| High-pass filter | Optional, cut-off at 16 Hz or 160 Hz |
| Gain settings | -20, 0, +20 |
| Level control | Manual or ALC (automatic level control) |
| Recording quality | Stereo/surround, up to 96kHz/24bit |
| Mounting | Attaches to camera hot shoe; extra accessory shoe on top |
| Compatibility (models) | S5M2, S5M2x, G9M2, GH6, GH5, S1, S1R, SH1 |
FAQ
Question: Will the adapter draw power from my camera so I don’t need an external battery?
Answer: Yes. The DMW-XLR1 connects and is powered via the camera’s accessory/flash shoe, allowing it to use the camera battery for operation.
Question: Can I use both condenser and dynamic microphones with this adapter?
Answer: Yes. You can select microphone or line level and enable phantom power (+48V) when you need to power condenser microphones. The adapter’s variety of settings helps adapt to different microphone types.
Question: How does the adapter help with unwanted low-frequency noise?
Answer: The unit offers an optional high-pass filter with cut-off options at 16 Hz or 160 Hz to reduce rumble and low-frequency noise depending on your recording situation.
Question: Which Panasonic cameras are supported for direct mounting and powering?
Answer: The DMW-XLR1 works with S5M2, S5M2x, G9M2, GH6, GH5, S1, S1R and SH1. It mounts on the camera’s hot shoe and uses the camera battery for power, enabling a compact setup for on-camera audio recording.