Saramonic SR-WM4CB VHF Trådlöst Mikrofonsystem

Saramonic SR-WM4CB VHF Wireless Microphone System – 4-Channel Lavalier Kit with Plug-On Transmitter

The Saramonic SR-WM4CB is a four-channel VHF wireless microphone kit designed for wireless transmission and reception of sound. It includes a plug-on transmitter and a receiver, and it operates on VHF band frequencies for reliable audio capture in a range of recording scenarios.

Four-channel VHF wireless system

This kit provides four switchable channels, allowing you to select one of four frequencies to avoid interference. It uses VHF band frequencies and supports both transmission and reception of audio, making it suitable for setups that require a compact wireless lavalier solution.

What’s included

• 1x lavalier microphone
• 1x Saramonic wireless transmitter SR-XLR4C (plug-on)
• 1x Saramonic RX receiver

Key features and benefits

• Four switchable frequencies free from interference — choose among four channels to help maintain a clean signal in environments with competing transmissions.
• 360 degree flexible antenna position — adjust the antenna for the best possible reception depending on your setup and placement.
• One mini XLR microphone input — accept a mini XLR mic directly into the transmitter for a straightforward connection.
• One 1/8” (3.5 mm) stereo line output to camera — feed the receiver output to your camera via the standard 3.5 mm line connection.
• One 1/8” (3.5 mm) headphone monitor output — monitor audio directly from the receiver with headphones for real-time verification.
• Real-time monitor — listen to the incoming audio as it is received to confirm levels and signal quality while recording.
• Power provided by AA battery — the system runs on readily available AA batteries for easy field replacement.
• Operating Frequencies: 200–216 MHz — the system operates within this VHF frequency range.

Specifications

FAQ

Question: Can I connect this system directly to a camera?

Answer: Yes. The receiver has a 1/8” (3.5 mm) stereo line output designed to connect directly to a camera’s microphone or line input for recording audio.

Question: How do I monitor the audio during recording?

Answer: The receiver features a 1/8” (3.5 mm) headphone monitor output and real-time monitoring, so you can listen to the incoming audio as it is received and check levels or signal quality on the spot.

Question: How many channels can I use at once and how do I avoid interference?

Answer: The system offers four switchable frequencies. Use the available channels to switch away from sources of interference and select the clearest frequency for reliable wireless transmission.

Question: What power source does the system use?

Answer: The units are powered by AA batteries, which are widely available and easy to replace in the field.

If you need further details about compatibility or setup, check the included connections and features above to confirm they match your camera and monitoring requirements.