Kondor Blue Talon XL Top Handle with Start/Stop Camera Trigger for EOS R5, RED KOMODO, FUJI, Z CAM, URSA, C300, C70, SONY A7, LUMIX

Kondor Blue Talon XL Top Handle with Start/Stop Camera Trigger for EOS R5, RED KOMODO, FUJI, Z CAM, URSA, C300, C70, SONY A7, LUMIX 

The Talon XL camera rig top handle is the bigger brother to our Talon Top Handle. It features the same molded rubber pad, which has been contoured to perfectly fit your hand.ed to perfectly fit your hand.

Not only is the Talon XL 20mm/.75” longer, it also features a remote trigger run/stop button. This makes operating the camera from the Talon XL rig top handle a dream.

Much like its namesake, the Talon XL camera rig top handle is meant to clasp all of your accessories with a range of mounting options. Starting at the front of the top handle, a short NATO rail allows for quick accessorizing. This top handle also allows you to add any of our Monitor Mounts via the ⅜” ARRI Mount. On the top side of the handle, it features a REC button and cold shoe mount, two more ⅜ ARRI mounts pre-loaded with ⅜ to ¼ bushings, a NATO rail, and our signature bubble level. Finally, the back side has an additional cold shoe mount with a threaded ¼” 20 mount perfect for wireless mic receivers or other small accessories. 

The Talon XL mounts via a NATO clamp and has a built-in 4mm hex tool to save you in a pinch with mounting other popular accessories. Designed with versatility and comfort in mind, the Talon XL is ready for anything.

Key Features:

Remote Start/Stop REC Button
2x Cold Shoes
2x Nato Rail
3x ⅜” ARRI Mount
1x Back Facing  ¼” Thread
Built-in 4mm Hex Tool
Molded Rubber Grip
Bubble Level
NATO Clamp 

Start/Stop REC button is compatible with popular cameras such as RED Komodo/Raptor, Canon, Fuji, Z CAM, URSA Mini Pro, LUMIX, Sony Cameras, and many more! (NOT the BMPCC yet)*

*The Trigger Handle does not include a Start/Stop cable. Browse our collection of shutter release cables. 

(Cables must be purchased separately unless purchased with a cage as a bundle.)

Top Trigger Handle Features:

Start/Stop Record Button. Supports both Sony LANC and Panasonic Protocols providing Compatibility for most cameras such as Z CAM, Blackmagic, Fuji, Sony, Canon, Panasonic, JVC, etc.
Five 3/8" threaded holes with ARRI Locator Pins for Anti-twist Accessories such as our Mini Quick Release Plates
Over Eighteen 1/4" hole options for mounting accessories
15mm Side Rod Support for EVF or Monitors
Cold Shoe mounts on each end of the Handle
Mounted via NATO Rail and can also slide on to both Left and Right Sides of Cage
Comfortable and Ergonomic Grip Design
Optional Accessories Include: FF Single Rod Adapter, T5 SSD Holder, ARRI Rosette Adapters, 15mm Rods, 501 ARRI Baseplate, Rosette Extension Arms, Rosette Handgrips, Mini Quick Release Plates, Cine Magic Arm, 2 Pin LEMO to D-Tap Cable


Dimensions: 5” x 3” x 1”

Weighs: 6 oz

 

COMPATIBLE WITH:

Canon EOS R, RP, R3, R5, R5C, R6, R6II, R7, R10
Canon Cinema C70, C100, C200, C300, C500 all versions
Canon DSLR: All cameras with a 2.5mm or N3 trigger port
Sony Alpha camera: A7sII, A7IV, A7RV, A1, A9II, A9, A7R IV, A7R III, A7R II, A7R, A7S II, A7S, A7III, A7II, A7, a6600, a6500, a6400, a6300, a6000, a5100, a5000, a3500, a3000, ILCE-QX1
Sony FX Cinema Line: FX30, FX3, FX6, FX9
Sony Compact/Camcorders: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, RX0 II, RX0, HX99, HX90V, HX80, HX60V, HX50V, HX400V, HX300, WX500, QX30, ZV-1, FDR-AX100, FDR-AX30, FDR-AX33, FDR-AV43, FDR-AX53, FDR-AX700, FDR-AXP35, HDR-CX230, HDR-CX240, HDR-CX320, HDR-CX330, HDR-CX380, HDR-CX405, HDR-CX430V, HDR-CX440, HDR-CX455, HDR-CX480, HDR-CX485, HDR-CX675, HDR-CX900, HDR-GW66V, HDR-GWP88V, HDR-PJ220, HDR-PJ230, HDR-PJ270, HDR-PJ275, HDR-PJ340, HDR-PJ350, HDR-PJ380, HDR-PJ430V, HDR-PJ440, HDR-PJ540, HDR-PJ650V, HDR-PJ660V, HDR-PJ670, HDR-PJ675, HDR-PJ790V, HDR-PJ810, HDR-PJ820
Lumix S1, S1R, S1H, S5, S5II, S5IIX
Lumix GH6, GH5, GH5 II, GH5S, GH4, GH3, GH2, GH1, G95, G9, G8, G7, G6, G5, G3, G2, G85, G10, G1, GX8, GX7, GX1, GF1,
Lumix DMC-FZ2500, DMC-FZ1000, DMC-FZ300, DMC-FZ200, DMC-FZ150, DMC-FZ100
Fuji XT3, XT4, XT5, XH2, XH2s,   X-T2, X-T1, X-T30, X-T20, X-T10, X-T100, X-Pro3, X-Pro2, X-E3, X-E2S, X-E2, X-A5, X-A10, X-H1, X100F, X100T, X70, X30, XF10, GFX 50S
Blackmagic Design URSA 4K, URSA Mini All versions, BMCC 2.5K, BM Production 4K, BM Studio Camera, Micro Cinema, Micro Studio, Original BMPCC 1080
RED Komodo, V Raptor, V Raptor XL, Rhino
Z Cam E2-S6, E2-S6G, E2-F6, E2-F8, E2, E2C, E2-M4

*Quick Guide for Camera Control Switch Modes:

"P": Canon EOS R, EOS R5C, EOS R6, LUMIX S1H, Panasonic GH5, S5, Fuji XT4, RED KOMODO, 

"S": All Sony Cameras, URSA Mini, C300, C500, C70, Z CAM

Tech Specs:

200 g/7.0 oz
Length: 140mm/5.5”
Mounted Height: 67.5mm/2.6”