Bright Tangerine Canon C400 Top Plate

Bright Tangerine Canon C400 Top Plate

Discover a new level of convenience with our dedicated top plate for the Canon C400. Made from three modular elements constructed of sturdy aluminium, the top plate adds unparalleled flexibility to your setup. No matter the complexity of your camera rig, you’ll be able to install them with ease on this reliable and low-profile plate.

A New World of Possibilities

Our C400 top plate provides extensive connectivity options with mounting points on the side, top, and rear, allowing full customisation. The 15mm rod console can be inverted for larger lenses or other front attachments, enhancing versatility.

Maximum Modification

The top plate comes in three core components, including the two side pieces which can be used independently. It has ample room for first-party Canon components such as the microphone mount and top handle with multifunction shoe, meaning you don’t have to compromise on any aspect of your rig. The 15mm rod console requires both sides to be installed.

Shockingly Simple

Speaking of access to accessories, the top plate also comes with a relocation point for Canon’s proprietary microphone shockmount, with an indented groove to eliminate vibrations, prevent wiggle, and keep it tight and secure.

Our Commitment to Quality

Our products are built to last: Bright Tangerine are proudly part of the 1% for the Planet initiative, endeavouring to make reliable and sustainable accessories. The sturdy anodised aluminium which the top plate is made from is sure to withstand the elements for years to come.

Technical Specifications

• Top
  • ARRI Pin-Lock: 10x 3/8”, 11x 1/4”
  • 2x QD Socket (Left and Right)
  • 1x Canon Microphone Shockmount Relocation
  • Top Handle: 50mm ¼”-20
  • Mounting: 4x ¼” screws (4mm Hex)
• Front Rod Console
  • 2x 15mm Rod
  • 5x M4 (10mm spacing)
  • Mounting: 2x M3 screws (2.5mm Hex)
• Sides
  • 6x MAP M4
  • 4x 1/4”
• Rear
  • 1x ¼”-20

Instructions/Assembly

Tools Required:

• Mounting: 4x 1/4” Screw, 4mm Hex Key
• Front Rod Console: 2x M3 Screws 2.5mm Hex Key

Assembly

15mm Rod Console

1. Align the front 15mm rod console pins with the matching holes on the left & right plates in the orientation you require.
2. Secure the rod console to the plates using the 2.5mm Hex key.

Top Plate to Camera

1. To install the top plate onto the camera, line up the four screws on the left and right brackets with their corresponding mounting points on the C400.
2. Use a 2.5mm Hex Key to tightly attach them to the camera.

From there, continue to customize your components as you see fit, using any of the provided mounting points. Ensure that all components, top plate included, are tightly attached to the C400.

Compatibility

Canon C400

What’s Included

• 1x Canon C400 Front Rod Console
• 1x Canon C400 Top Plate (Left)
• 1x Canon C400 Top Plate (Right)
• 4x ¼”-20 Mounting Screws

Part of the C400 System

The new Canon C400 is for high-end video content creation, and Bright Tangerine have a range of high-quality accessories to help you fine-tune your setup. Upgrade your C400 rig further with:

• B4005.1031 - Top Plate Filler
• B4013.1001 – 1/4”-20 Cheese Plate Adapter
• B4013.1004 – NATO Cheese Stick

Zero Compromises

Manufactured in the UK by an elite team of researchers, engineers and quality control experts; our products are made to maximise convenience whilst minimising constraints. Our accessories span a huge range of products, but the common denominators are their quality, longevity and versatility. Should you find us lacking in any of those, our dedicated customer service team can advise and assist however you need.

Warranty

24 months