Wooden Camera Director's Monitor Cage v2
£3,618.94
- VAT free purchase available at checkout.
Description
Article no.: 1219
Wooden Camera Director's Monitor Cage v2
Wooden Camera Directors Monitor Cage v2 (p/n 239000). The Director's Monitor Cage v2 is engineered to be universally compatible with any monitor up to 9 inches (measured diagonally) and attaches via top, bottom, or rear 1/4-20 mounting locations. Newly designed main brackets also allow direct mounting to the rear of Convergent Design Odyssey and Apollo. The DMCv2 arrives mostly pre-assembled, with simplified, rod-based height adjustment. Ergonomic wooden hand grips can be quickly positioned via the built-in 15mm clamps. The battery mounting plate features V-Mount and Gold Mount attachment points as well as swing away functionality for easy access to the rear of the monitor and installed wireless devices. The cage includes a built in baby pin clamp with locking thumbwheel for stand mounting. The included sun shade is adaptable to most monitors and snaps directly to the cage frame. The bottom of the shade is made of velcro, which can be adjusted to the proper width...Included:
- 6x 1/4-20 x 1/2" button head screws
- 6x 1/4-20 x 3/8" button head screws
- 2x Offset adapters
- 4x M3 x 8mm philips screws (for V-Mount plate)
- 4x M3 x 12mm philips screws (for Gold Mount plate)
- 1x M2.5 x 4mm socket cap screw (for Odyssey 7Q location pin)
- 1x Teradek Mounting Bracket
- 1x 1/4-20 x 1 1/4" button head screw and 1/4-20 nut (for Teradek Bolt)
- 4x 4-40 x 1/2" socket cap screws ( for Teradek receiver)
- 4x M3 x 20mm socket cap screws (for Odyssey 7Q)
- 1x WC Cable Tie
- 1x Sun Shade
- 1x Sun Shade (velcro loop for Odyssey)