DigitalFoto Thanos Procine Stabilizer Steadycam System 35kg Payload
- VAT free purchase available at checkout.
- BrandDigitalfoto
Description
Article no.: 31243
DigitalFoto Thanos Procine Stabilizer System - Steadicam for heavy cinema rigs (5-35 kg)
Thanos Procine is a complete steadicam system for professional filming with heavy cameras. With carrying capacity up to 35 kg, it handles cine setups with ARRI ALEXA 35, ARRI AMIRA, Sony FX6 and DJI Ronin 4D Flex. Carbon fiber post, dual spring arms and ergonomic vest provide smooth movements and safe weight distribution during long takes.
Built for demanding productions
The system combines 3K carbon fiber (2mm thickness) with a robust sled chassis and low center of gravity step. Fine left/right and forward/backward adjustment on the top plate allows you to quickly find the exact balance for each rig. Integrated power and signal (LEMO and SDI) grommets keep wiring clean.
Dual arms & ergonomic vest
The double spring arm reduces vertical vibrations and can be fine-tuned for different loads. The vest is size-adjustable (chest up to 123 cm, waist up to 130 cm) and has a rear assist handle to increase safety during complex shots.
Power feed & rigging
The Sled features V-mount plates with D-Tap 16V and 24V outputs for camera, monitor and wireless systems. Integrated monitor arm and clear scale on the lower brace facilitate center of gravity work. LB-01 Low Mode Bracket can be used for low angles.
Compatibility & stand-alone CINE POST
The carbon fiber post (CINE POST) can be purchased separately and works with systems whose arm pin is ≤16 mm. Thanos Procine integrates into workflows with Tiffen, Laing, Movcam, ARRI Trinity 2/Artemis 2 and Tilta Float.
Included in the package
- Carbon Fiber Post Sled
- Support vest
- Dual Arm (double spring)
- Counterweights: 0.95 kg ×1 and 0.5 kg ×1
- DP02 Docking Station
- LB-01 Low Mode Bracket
- D-Tap to LEMO 3-pin power cables (12 V & 24 V)
- LEMO 2-pin to 8-pin coiled cable (for ARRI cameras)
- AR91 coil: 2-pin LEMO to 2.5 mm DC (0.35-0.5 m)
- Pendulum Counterweight Bracket for stabilizer
- 1/4" & 3/8" screws, screwdriver and arm tension wrench
- Aluminum transport case
Technical Specifications
| Specification | Detail |
|---|---|
| Payload | 5-35 kg (up to 77.16 lbs) |
| Arm weight | 5 kg |
| Sled weight | 7 kg (carbon fiber) |
| Vest weight | 5 kg |
| Post sections | 2 (3K carbon fiber, 2 mm) |
| Post diameter | 40 / 46 mm |
| Post length | 665-1100 mm |
| Power ports | LEMO 2/3/4-pin feedthrough |
| Signal port | 3G-SDI ×2 |
| Battery plates | V-mount; 2× D-Tap 16 V (1 plate), 4× D-Tap 24 V (2 plates) |
| Compatible arm-pin | ≤16 mm (for separate CINE POST) |
| Body size vest | Chest up to 123 cm, waist up to 130 cm |
Smart FAQ
Question: What cameras and rigs does the system work with?
Answer: ARRI ALEXA 35/AMIRA, Sony FX6, DJI Ronin 4D Flex and similar cinema rigs. Compatible with Tiffen, Laing, Movcam, ARRI Trinity 2/Artemis 2 and Tilta Float.
Question: Can the vest handle long duration sessions?
Answer: Yes, the vest is padded, adjustable and distributes weight evenly. Assistant handles on the back provide extra security.
Question: How do I get power to the camera and accessories?
Answer: Two V-mount plates offer D-Tap outputs in 16V and 24V. Pass-through LEMO ports and 3G-SDI simplify cabling.
Question: Can I buy only the carbon fiber post (CINE POST)?
Answer: Yes. It can be used stand-alone if your arm-pin is ≤16 mm in diameter.
Question: Is low-position filming included?
Answer: Yes, the LB-01 Low Mode mount is included for low angles.