Panasonic AW-RP150GJ5 PTZ Control Panel

Panasonic AW-RP150GJ5 – 7-inch touchscreen PTZ control panel with one-hand joystick and PoE+

The Panasonic AW-RP150GJ5 is a dedicated PTZ camera controller that combines a 7-inch WVGA touchscreen GUI with a single-hand joystick and a seesaw rocker for smooth zoom or focus control. It supports both IP and serial connections and is designed for live production, broadcast, education, and corporate environments where fast, accurate camera operation matters.

Why this controller fits live and multi-room workflows

This unit lets operators control multiple cameras quickly. You can address up to 200 cameras over an IP network and up to five cameras via RS-422. Ten direct camera-select buttons and up to twenty camera groups (with 10 cameras per group) make it easier to switch between locations or studios without losing time. In short, the AW-RP150GJ5 helps streamline multi-room and multi-studio setups for fast-paced productions.

Connectivity and control

The controller connects to PTZ systems in several ways to match different infrastructure needs. Network control uses 100BASE-TX with PoE+, allowing data and power over a single cable when PoE+ is available. For legacy or long-distance serial setups, RS-422 (RJ-45) provides reliable control up to 1000 m using Cat5e or better, shielded cable. The unit also offers camera select and grouping to simplify complex installations.

Monitoring, tally and power options

Operators can monitor return video on the built-in 7-inch WVGA display via a 3G-SDI input. The same signal can pass downstream through an ACTIVE THRU 3G-SDI output. For system integration, tally and GPIO terminals support communication with switchers and automation systems. You can feed power via PoE+ or via a 12 V DC input using an XLR 4-pin connector, depending on your site’s power infrastructure.

Memory, presets and motion tracing

The AW-RP150GJ5 stores common camera positions and motion traces to speed repetitive tasks. It offers 100 presets for quick recall. For complex moves, tracing memory records up to 5 minutes per camera, with up to 10 traces per camera, allowing you to automate repeatable pan/tilt sequences across shoots or events.

Key features

• Integrated 7-inch touchscreen GUI monitor (WVGA 800×480)
• One-hand joystick with a seesaw rocker for zoom or focus control
• Control up to 200 cameras over IP; up to 5 cameras over RS-422
• Ten direct camera-select buttons; up to 20 camera groups (10 cameras per group)
• Preset memory: 100 presets; tracing memory per camera up to 5 minutes, 10 traces per camera
• Network/Power: 100BASE-TX with PoE+; 12 V DC input (XLR 4-pin)
• Serial control: RS-422 (RJ-45), up to 1000 m cable length (Cat5e or better, shielded)
• Video I/O: 3G-SDI IN (BNC); ACTIVE THRU 3G-SDI OUT (BNC)
• Tally/GPIO: D-sub 25-pin (Tally In x10, GPI x6, GPIO configurable I/O), plus separate TALLY OUT (open collector)
• SD card slot (SDHC/SDXC) for scene files and system backups
• Pan/tilt speed adjustment: 7 levels; tally LED colors: green/red
• Approx. dimensions: 342 × 178 × 245 mm (W×H×D, excluding protrusions)
• Approx. mass: 3.2 kg

Technical specifications

FAQ

Question: How many PTZ cameras can I control from one AW-RP150GJ5 over an IP network?
Answer: You can address up to 200 cameras over an IP network using 100BASE-TX with PoE+ connectivity, which supports large multi-room or studio deployments.

Question: Can I use the controller with older serial systems or long cable runs?
Answer: Yes. The controller supports RS-422 serial control (RJ-45) for up to five cameras and allows cable lengths up to 1000 m when you use Cat5e or better, shielded cable, making it suitable for longer, legacy installations.

Question: How do I monitor return video and pass it downstream?
Answer: The AW-RP150GJ5 accepts a 3G-SDI input that displays on the built-in 7-inch WVGA touchscreen. It also provides an ACTIVE THRU 3G-SDI output to pass the same signal downstream to other devices.

Question: Does the controller support backup and quick deployment of settings?
Answer: Yes. An SD card slot accepts SDHC/SDXC cards for saving scene files and system backups. You can clone presets and settings across controllers or camera fleets for faster setup.

Question: What integration options exist for tally and automation systems?
Answer: The unit includes a D-sub 25-pin connector with Tally In x10, GPI x6, and configurable GPIO I/O, plus a separate TALLY OUT (open collector). These options allow integration with switchers and automation systems for synchronized operation.