SmallRig 5341 Camera Cage Kit for Fujifilm GFX Eterna 55
- VAT free purchase available at checkout.
- BrandSmallRig
Description
Article no.: 31609
SmallRig 5341 Camera Cage Kit for Fujifilm GFX Eterna 55 – Modular 15mm rod system for multi-scene filmmaking
This SmallRig 5341 kit gives filmmakers a modular, multi-scene shooting solution built around a 15mm rod system. It includes top, side and base plates, rods, a monitor mount and a control handle. The kit also provides multiple expansion interfaces to attach accessories and to adapt the camera for tripod or shoulder use.
Modular design and expansion interfaces
The system adopts a modular design so you can configure it for different shooting scenarios. It includes a wide range of expansion interfaces to connect accessories and tools:
- 1/4"-20 and 3/8"-16 threaded holes
- ARRI 3/8"-16 and 1/4"-20 locating holes
- 15mm dual-rod clamps
- Measure hook hole
- QD sockets
- NATO rails
- Cold shoe mounts
These interfaces let you mount monitors, audio receivers, wireless transmitters, follow focus units and more without modifying the camera body.
Ergonomics, handling and power options
The included control handle improves ergonomics and supports smoother camera movement. Its adjustable ARRI rosette delivers comfortable low-angle shooting and lets you set the handle position for your preferred grip. Additionally, you can attach V-Mount battery plates to the cage when you need reliable external power for longer shoots.
Rod system, follow focus and tripod use
The kit contains 15mm dual rods and rod clamps to support standard filmmaking accessories. For example, adding follow focus units to the 15mm dual rods enables wireless follow focus operation. Likewise, the baseplate and rod configuration work with tripods to facilitate smooth transitions between landscape and portrait shooting modes.
Top mounts, monitor mounting and rear accessories
The top of the cage accepts magic arms and 15mm single rod clamps for mounting wireless transmitters, monitors and audio gear. The included monitor mount secures original FUJIFILM monitors using built-in 1/4"-20 screws and locating pins. It also provides stepless, multi-directional angle adjustment through the 15mm rods, so you can position the monitor precisely.
Moreover, you can remove the camera’s default port covers using the supplied M3 screws and Allen wrench. After removal, install the dedicated rear side plate to mount accessories such as wireless transmitters and D-Tap hubs.
Baseplate details and quick setup
The kit features an ARRI dovetail standard baseplate with dual 15mm LWS rod clamps. This baseplate supports rapid, tool-free setup via a lever. The bottom of the baseplate includes anti-drop pins and 1/4"-20 and 3/8"-16 threaded holes to maintain compatibility with standard ARRI dovetail plates and ARRI BP8 19mm bridge plates.
Compatibility
- FUJIFILM GFX ETERNA 55
Packaging includes
- Top Plate (with 15mm Dual Rod Clamp)
- Left Side Plate
- Right Side Plate
- 15mm Dual Rod Base Plate
- 2x 15mm Rod (15cm)
- Rear Side Plate
- Control Handle
- Monitor Mount
- 4x M3 Screw
- Allen Wrench
- Operating Instruction
Technical specifications
| Feature | Detail |
|---|---|
| Compatibility | FUJIFILM GFX ETERNA 55 |
| Rod system | 15mm dual-rod clamps; 2x 15mm rods (15cm) |
| Threaded and locating holes | 1/4"-20, 3/8"-16; ARRI 3/8"-16 and 1/4"-20 locating holes |
| Mounting features | QD sockets, NATO rails, cold shoe mounts, measure hook hole |
| Baseplate standard | ARRI dovetail standard baseplate with anti-drop pins; dual 15mm LWS rod clamp |
| Accessories included | Control handle, monitor mount, rear side plate, M3 screws, Allen wrench |
FAQ
Question: Will this cage fit my Fujifilm GFX Eterna 55 camera?
Answer: Yes. The SmallRig 5341 is specifically designed for the FUJIFILM GFX ETERNA 55 and includes dedicated plates and locating pins to secure the camera and original FUJIFILM monitors.
Question: Can I mount a monitor and a wireless transmitter at the same time?
Answer: Yes. The top plate supports magic arms and 15mm single rod clamps for mounting monitors and wireless transmitters. The kit also provides NATO rails, cold shoe mounts and QD sockets for additional accessories.
Question: How does the baseplate handle quick setup and tripod mounting?
Answer: The kit uses an ARRI dovetail standard baseplate with a lever for tool-free setup. It also includes 1/4"-20 and 3/8"-16 threaded holes and anti-drop pins for compatibility with ARRI dovetail plates and ARRI BP8 19mm bridge plates, which helps when switching between tripod orientation modes.
Question: Are follow focus systems supported?
Answer: Yes. The included 15mm dual rods and rod clamps allow you to mount follow focus units, including wireless follow focus systems, for precise lens control.
Question: What tools are included for installation and accessory changes?
Answer: The package includes 4x M3 screws and an Allen wrench to remove default port covers and to install the rear side plate. These tools help you mount wireless transmitters, D-Tap hubs and other rear accessories without needing additional tools.