SmallRig 5484 Turbo Charging Kit for LP-E6NH Camera Batteries
- VAT free purchase available at checkout.
- BrandSmallRig
Description
Article no.: 31459
SmallRig 5484 Turbo Charging Kit for LP-E6NH – Dual-Channel Fast Charger with 2× 1940mAh Batteries
This kit includes two high-performance LP-E6NH camera batteries and a dual-channel fast charger designed for filmmakers and photographers who need reliable on-set power. The charger uses a full decoding chip to ensure compatibility with Canon LP-E6NH batteries, removing pop-up warnings while allowing the camera to display accurate in-camera power levels. You can also continue to use the original Canon charger alongside this kit.
What the kit contains
- Camera battery charger for LP-E6NH
- 2× camera batteries for LP-E6NH (true-rated output: 1940mAh each)
- 2× battery covers
- 60W USB-C to USB-C cable (1 m)
Key features and charging behaviour
The charger supports simultaneous charging of two batteries or single-battery charging. When supplied with sufficient power, it can fully charge two batteries in approximately 2 hours, enabling fast turnaround between takes.
Intelligent circuitry protects both charger and batteries. It monitors temperature and voltage and provides multiple safety protections, including over-temperature and over-voltage safeguards. When the charger detects overheating it automatically slows the charge rate; in case of overvoltage it cuts off power. Near full capacity the charger switches to trickle charging to help preserve battery health.
Each charging channel features five LED indicators that display power levels in 20% increments so you can see charge status at a glance, even without external power. A red warning light activates when battery levels are critically low. The charger uses a universal USB-C input and is supplied with a fast-charging cable, making it compatible with wall adapters, car chargers, and power banks for flexible charging on location.
Important usage notes
- Recommended to use a power adapter with 22.5W or higher output for optimal charging speed.
- When using a 5V / 2.4A adapter the charger operates in slow-charge mode. In that mode it prioritises charging the battery in Channel 1 first and automatically switches to Channel 2 once Channel 1 is fully charged.
- LP-E6NH and LP-E6P batteries can share the same charger.
Certifications
- FCC
- CE
- RoHS
- ISED
Charger specifications
| Specification | Details |
|---|---|
| Material(s) | PC + ABS |
| USB-C Input | 5V / 2.4A, 9V / 2A, 12V / 1.75A, 15V / 1.5A; 22.5W (Max) |
| USB-C Protocol | PD3.0, QC2.0, QC3.0 |
| Rated Output (Per Channel) | 8.4V / 1A |
| Operating Temperature | 0°C to 45°C |
Battery specifications
| Specification | Details |
|---|---|
| Battery Type | Lithium-ion |
| Nominal Voltage | 7.2V |
| Cell Capacity | 1940mAh |
| Rated Energy | 13.968Wh |
| Charging Limit Voltage | 8.4V |
| Charging Current (Standard) | 0.2C (408mA) |
| Charging Current (Fast) | 0.7C (1428mA) |
| Maximum Discharge Current | 4A |
| Discharge Cut-off Voltage | 5.0V |
| Charging Temperature | 0°C to 45°C |
| Discharging Temperature | -10°C to 60°C |
Compatible Canon cameras
The batteries and charger are compatible with a wide range of Canon cameras that use LP-E6 series batteries, including:
- Canon EOS 5D Mark II / 5D Mark III / 5D Mark IV / 5DS / 5DSR
- Canon EOS 6D / 6D Mark II
- Canon EOS 7D / 7D Mark II
- Canon EOS 60D / 60Da / 70D / 80D / 90D
- Canon EOS R / R5 / R6 / R5 C / R7 / R6 Mark II
- Canon XC10 / XC15
Frequently Asked Questions
Question: Will this charger show the correct battery level in my Canon camera?
Answer: Yes. The charger and batteries include a full decoding chip that ensures compatibility with Canon LP-E6NH batteries. This removes pop-up warnings and supports the in-camera power display, so your camera can show accurate battery status.
Question: How long does it take to fully charge both batteries?
Answer: When you use a suitable power adapter (recommended 22.5W or higher), the charger can fully charge two batteries in approximately 2 hours. Charging time will increase if you use a lower-power adapter.
Question: Can I charge the batteries from a power bank or in a car?
Answer: Yes. The charger has a universal USB-C input and supports PD3.0 and QC protocols. It comes with a 60W USB-C cable and works with wall adapters, car chargers, and power banks that meet the required output.
Question: Are the batteries and charger protected against overheating and voltage issues?
Answer: Yes. The charger includes intelligent circuitry that monitors temperature and voltage. It slows charging if overheating occurs, cuts power in overvoltage situations, and uses trickle charging near full capacity to help maintain battery health. The product also carries FCC, CE, RoHS and ISED certifications.