SmallRig 5507 Shock Absorber Support with Electronic Suction Cup for Osmo Pocket 3 / HERO13 and more

SmallRig 5507 Shock Absorber Support with Electronic Suction Cup – 600g payload for stable vehicle-mounted shooting

The SmallRig 5507 is specifically designed for vehicle-mounted shooting with the DJI Osmo Pocket 3 and includes an adapter for action cameras such as the GoPro HERO13 Black and Insta360 X4. It reduces vertical vibrations during in-vehicle shooting by combining a high-rebound spring with a hydraulic damping system, which helps deliver more stable footage on the move.

Key features and adjustable damping

The shock absorber arm uses a high-rebound spring and hydraulic damping system to absorb bumps and vertical motion. In addition, the arm has a damping adjustment knob so you can tune the response to different road conditions. As a result, you can adapt the setup quickly when you move from smooth roads to rougher surfaces.

Electronic suction cup with automatic vacuum monitoring

The package includes a 5-inch electronic suction cup that continuously monitors vacuum pressure. When the measured pressure falls below 75%, the suction cup activates an auto-replenishment function to restore optimal adhesion up to 100%. This helps maintain a secure mount during extended shoots.

Practical build and accessories

The arm supports a 600g payload, accommodating most mainstream action cameras. The kit also includes a dust cover to protect the suction cup from scratches and extend its service life. For transport and secure storage, the product comes with a hard storage case, making it easier to carry between shoots.

Compatibility

• Compatible with action cameras featuring a 1/4"-20 threaded hole at the bottom, such as DJI Osmo Pocket 3, GoPro HERO13 Black, and Insta360 X4 / X3.
• Compatible with action cameras with a cage (featuring a 1/4"-20 threaded hole), such as GoPro HERO12 Black, HERO11 Black, HERO10 Black, HERO9 Black, and DJI Osmo Action 5 Pro / 4 / 3.

Packaging includes

• Shock Absorber Support
• Electronic Suction Cup
• Suction Cup Dust Cover
• Extension Arm
• Adapter
• Mount Plate
• Counterweight
• Allen Wrench
• Storage Bag
• 2x Operating Instruction

Important usage notes and safety

• Use the suction cup only on smooth, dry, and flat surfaces. Avoid rough, wet, uneven, dirty, fragile, or delicate surfaces to prevent loss of adhesion.
• When using the device outside the vehicle, secure it with a safety strap, keep driving speed below 100 km/h, check suction performance before use, and inspect the suction every 2 hours during extended shoots.
• Operate the electric suction cup only within the temperature range of -25°C to 60°C.
• Straps are not included and can be purchased separately if required for added safety.

FAQ

question: Can I use the SmallRig 5507 on any part of my vehicle?
Answer: Use the suction cup only on smooth, dry, and flat surfaces of the vehicle. Avoid rough, wet, uneven, dirty, fragile, or delicate surfaces to ensure reliable adhesion. Also, when mounting outside the vehicle, secure the unit with a safety strap and follow the inspection guidance.

question: Will the mount hold my camera securely during motion?
Answer: The shock absorber arm supports up to 600 g and fits cameras with a 1/4"-20 threaded hole. The damping system and adjustable knob reduce vertical vibrations, and the electronic suction cup actively monitors and replenishes vacuum to maintain adhesion during shooting.

question: How does the electronic suction cup maintain adhesion?
Answer: The suction cup continuously monitors vacuum pressure. If the pressure drops below 75%, the auto-replenishment function activates to restore adhesion up to 100%, helping to maintain a secure mount throughout your shoot.

question: What are the environmental limits for the suction cup?
Answer: The electric suction cup is rated for use between -25°C and 60°C. Use within these temperatures to ensure proper performance and avoid damage.

question: Are safety straps included with the product?
Answer: No, straps are not included. The product listing notes that straps must be purchased separately if you plan to use the mount outside the vehicle or want additional security.

question: What should I check during extended shoots?
Answer: Before starting, verify suction performance. During extended use, inspect the suction and mount every 2 hours and keep the driving speed below 100 km/h when the mount is used externally to maintain safety and adhesion.